Self-Venting Taps

Similar construction to the Quick Serve Tap line, only these taps are self-venting, providing a simple means to dispense liquids without interruption from rigid, non-vented containers. Aeroflow and Smooth Flow taps combat the problems associated with non-vented taps when used with rigid packaging, namely: glugging, splashing, restricted flow-rate and collapse of the container. With the Aeroflow and Smooth Flow taps, liquid flows out of the container while air flows back in via a vent tube molded within the tap. The result is smooth, glug-free liquid flow, no hazard, no waste, and no need for secondary venting.

Self-Venting Taps are available fitted to 38mm and 63mm screw caps, as well as to 3/4" adapters.

Applications	Aeroflow Tap with 38mm screw ring	Component Materials
For use with rigid, non-vented containers and bottles with an externally threaded 38mm/400 neck finish. U.S. FDA Compliant	COM4406	Tap Body: Linear Low Density Polyethylene Spigot: Polypropylene Screw Ring: Polypropylene Separator: Polypropylene Washer: Natural Rubber

Applications	Aeroflow Tap with 3/4" adapter	Component Materials
For use with rigid, non-vented containers and drums with an internally threaded 3/4" opening/bung. Also can be screwed into bung plugs and caps with a 3/4" threaded reducer. U.S. FDA Compliant	COM4408	Tap Body: Linear Low Density Polyethylene Spigot: Polypropylene Screw Ring: Polypropylene Separator: Polypropylene Washer: Natural Rubber

Applications	Smooth Flow Tap	Component Materials
For use with rigid, non-vented containers and bottles with an externally threaded 38mm/400 neck finish. U.S. FDA Compliant	COM4434	Tap Body: Linear Low Density Polyethylene Spigot: Polypropylene Screw Ring: Polypropylene

Applications	Aeroflow Tap with 63mm screw ring	Component Materials
For use typically with 2.5 gallon F-style bottles with 63mm opening. Self-venting tap allows air into bottle as liquid is dispensed. Eliminates splashing and glugging. Ideal for Ag-chem, Sani-chem, and edible oil applications. U.S. FDA Compliant	COM6977	Tap Body: Linear Low Density Polyethylene Spigot: Polypropylene Separator: Polypropylene Washer: Natural Rubber Sleeve: Linear Low Density Polyethylene Screw Ring: (Rieke Corporation FS 632) Polypropylene with Polyethylene foam liner