3/4" Drum & Barrel Taps

Worldwide Dispensers offers both screw-action and lever style taps for the purpose of dispensing liquids from containers with a 3/4" bung, blanked opening (25mm diameter,) or other aperture. These taps can also be threaded into screwcaps with 3/4" internal well. The screw-action Drum Tap (COM 4411) is a plug or 'needle' valve, and is molded with polyethylene materials. Like all W&D products, the Drum Tap conforms to U.S. FDA regulations and is suitable for a wide variety of industrial chemicals as well as spirits and other food products.

The 3/4" Jumbo Hex (COM 4449) is a lever tap constructed with polypropylene (PP) and high density polyethylene (HDPE). At a constant liquid head of 25cm, water will flow through the Jumbo Hex at a rate of 296 ml./second, making this the highest-flow tap of any similar plastic 3/4" faucet in the market. Additionally, unique component assembly produces an exceptionally smooth turning operation, eliminating the binding and stiffness found in more common 3/4" drum faucets. A natural rubber gasket ensures completely leak-free product discharge.

Finally, the 3/4" Water Butt Tap (COM 4660) is a HDPE/PP molded lever tap, which was originally designed as a discharge tap for use with garden cisterns. This tap features a stationary spigot/nozzle, which is ideal for applications such as fermenting/home brew, where tubing is commonly connected to the spigot end. While the lever is turned on/off, the spigot end remains stationary, preventing kinking/binding of the tubing. The spigot is also barbed to grip and hold tubing in place.

Applications	Jumbo Hex 3/4" Drum Faucet	Component Materials
For use with Drums, Carboys, and other containers with 3/4" internally threaded closure or bung. Washer eliminates leakage. Reducer nozzle COM4464 available for tapping into small opening bottles. U.S. FDA Compliant	COM 4449	Tap Body: High Density Polyethylene Spigot: Polypropylene Washer: Natural Rubber Reducer Nozzle: (COM4464) Polypropylene

Applications	3/4" Drum Tap	Component Materials
For use with Drums, Carboys, Gerricans and other containers with a 3/4" internally threaded closure or bung. Washer eliminates leakage. Needle-style valve for maximum flow control. U.S. FDA Compliant	COM 4411	Tap Body: Polyethylene Washer: Nitrile Rubber

Applications	Water Butt Tap	Component Materials
Designed for screwing into 3/4" blanked hole in container sidewall. EPDM washer provides a leak-proof seal. 3/4" Backnut Required. Barbed nozzle remains stationary while turning handle eliminates problem of kinked tubing. U.S. FDA Compliant	COM 4660	Tap Body: High Density Polyethylene Spigot: Polypropylene. Static nozzle has 5/8" barb for attaching to hose/tubing Washer: EPDM