2" Drum Major Tap (COM4420) HDPE molded, screw-operated
valve, LLDPE 'needle' plug, designed for use with 2" NPSM threaded
opening. PP retaining ring and nitrile rubber gasket in place.
Dispenses at right angle to container exit port. Can be disassembled,
cleaned and re-assembled to remove impacted food/other particles.

2" Straight Through Drum Major Tap (COM4417) HDPE molded,
screw operated valve, LLDPE 'needle' plug, designed for use with 2" NPSM
threaded opening. PP retaining rings and nitrile rubber gaskets in
place. Exit port is in line with entry port. Can be disassembled,
cleaned and re-assembled to remove impacted food/other particles.

Cutter adapter (COM4439) 2" HDPE molded adapter with
stainless steel cutter pin. Attach to entry port of Drum Tap
and screw into gland/fitment. Designed to pierce and cut 345
degree opening in IBC's inner liner, as Tap is screwed into
gland/fitment. Tap will seal before inner bag is pierced.

2" Gland (COM4491) 2" LLDPE molded gland (fitment/spout)
designed to attach 2" tap/valve to inner liner of IBC. Internal
BSP/NPT thread, also available in HDPE.